Products

Filters

Showing 1-24 of 196 products

24/48/All

Sort By
Please add widgets to the WooCommerce Filters widget area in Appearance > Widgets
  • ribbed strip
    ribbed strip

    11KV Tested Rubber Matting

    , , , , ,
    1m wide x 6mm thick electrically tested switchboard ribbed rubber matting. SBR/NR rubber safety matting for use in electrical installations to isolate and mitigate against shock. Fully certified and tested to 11,000 volts regulatory branding on reverse, fine ribbed anti slip surface. If you require any further information or you have specific requirements please don't hesitate to get in contact with us on 01782 745588. Specification: DESIGN: Fine ribbed 11kV tested COLOUR: Black TEMPERATURE RATED: -20 to 70°C RUBBER: SBR/NR HARDNESS: 70 shore A MAX ROLL LENGTH: 10 metres STANDARD ROLL WIDTH: 1 metre wide THICKNESS: 6mm SPECIFICATION: 11000V WORKING VOLTAGE: 450V AC
  • ribbed strip
    ribbed strip

    15KV Tested Rubber Matting

    , , , , ,
    1m wide x 9.5mm thick electrically tested switchboard ribbed rubber matting. SBR/NR rubber safety matting for use in electrical installations to isolate and mitigate against shock. Fully certified and tested to 15,000 volts regulatory branding on reverse, fine ribbed anti slip surface. If you require any further information or you have specific requirements please don't hesitate to get in contact with us on 01782 745588. Specification: DESIGN: Fine ribbed 15kV tested COLOUR: Black TEMPERATURE RATED: -20 to 70°C RUBBER: SBR/NR HARDNESS: 70 shore A MAX ROLL LENGTH: 10 metres STANDARD ROLL WIDTH: 1 metre wide THICKNESS: 9.5mm SPECIFICATION: 15000V WORKING VOLTAGE: 650V AC
  • R2AT
    R2AT

    2 Wire Hydraulic Hose SAE 100R2AT

    , ,
    SAE100 R2AT 2 wire hydraulic rubber hose for high pressure hydraulic lines, with fuel oil, antifreeze solutions, air and water.
    Cover: Weather, oil, abrasion and ozone resistant synthetic rubber.
    Branding: DIN EN 853 2SN SAE 100R2AT size (inches) month & year.
    Reinforcement:2 high tensile steel braids.
    Tube: Oil resistant synthetic rubber.
    Temperature: From -40°C to +100°C. (peaking to +110°C)
    Safety Factor: 4:1 Minimum.

    DASH
    NUMBER
    I.D
    INCH
    I.D.
    MM
    O.D
    MM
    W.P
    BAR
    W.P
    PSI
    B.P
    BAR
    B.P
    PSI
    04 1/4" 6.4 15 400 5800 1600 23200
    06 3/8" 10 19 330 4785 1320 19200
    08 1/2" 12.7 22.2 275 3990 1100 16000
    12 3/4" 19 29.3 215 3160 850 12600
    16 1" 25.4 38.1 165 2395 650 9600
  • Acetal
    Acetal

    Acetal (POM) Rod

    , ,
    TRADE NAMES: Acetal, Delrin, Ertacetal C, Ertacetal H, POM C, POM H
    COLOUR: Natural, Black , Deep Brown
    TEMPERATURE RATED: -50°c to + 100°c (+140°c short term)
    APPLICATIONS: Machine parts, Gears, Guide and Seals, Friction Bearings and Rollers
    ROD LENGTH: Up to 3000mm
    ROD DIAMETER: Up to 500mm

    Acetal is a tough thermoplastic material with high physical strength, rigidity and dimensional stability. Acetal rod is ideal for machining and is commonly used in white for food contact applications. It has a low water absorption and has a high resistance to a variety of chemicals.
  • Nylon 6
    Nylon 6

    Acetal Sheet

    , ,
    TRADE NAMES: Acetal, Delrin, Ertacetal C, Ertacetal H, POM C, POM H
    COLOUR: Natural, Black
    TEMPERATURE RATED: -50°c to + 100°c (+140°c short term)
    APPLICATIONS: Machine parts, gears, guide and seals, friction Bearings, friction strips, insulators and kneading elements.
    SHEET SIZE: 1000mm x 620mm, 3000mm x 620mm, 2000mm x 1000mm, 3000mm x 500mm
    SHEET THICKNESS: Up to 150mm

    Acetal is a tough thermoplastic material with high physical strength, rigidity and excellent impact resistance. Acetal sheet has excellent machinability properties making it easy to machine and is commonly used in white for food contact applications. It has a low water absorption and has a high resistance to a variety of chemicals and has got good sliding properties and wear resistance.


    *Other sheet sizes are available and may depend on thickness. Please enquire for more information.
  • clear rod
    clear rod

    Acrylic (Perspex) Rod

    , ,
    TRADE NAMES: Perspex, PMMA COLOUR: Clear TEMPERATURE RATED: Up to +70°c (+90°c short term) APPLICATIONS: Sight glass, signage, lighting and displays ROD LENGTH: Up to 2000mm ROD DIAMETER: Up to 200mm Acrylic (Perspex) rod is not suitable for applications that require high impact strength but it does have excellent UV resistance and is resistant to some weak acids and alkalis. This can can be fabricated, formed and is easy to machine, polish cut and drill.
  • Acrylic
    Acrylic

    Acrylic (Perspexå) Sheet

    , ,
    TRADE NAMES: Perspex<å, PMMA
    COLOUR: Wide selection available
    TEMPERATURE RATED: Up to +70°c (+90°c short term)
    APPLICATIONS: Sight glass, signage, lighting and displays
    SHEET SIZE: 3050mm x 2050mm, 2550mm x 2050mm, 2440mm x 1220mm, 2050mm x 1250mm, 1830mm x 1220mm
    SHEET THICKNESS: Up to 20mm

    Acrylic (Perspexå) sheet is not suitable for applications that require high impact strength but it does have excellent UV resistance and is resistant to some weak acids and alkalis. This can can be fabricated and formed and is easy to machine, polish cut and drill. This material is commonly used in signage and display applications die to its wide spread of colours available.


    *Other sheet sizes are available and may depend on thickness. Please enquire for more information.
  • 350MHF
    350MHF

    Airduc PUR 355 AS Heavy Duty Ducting

    , ,
    Fully antistatic, flame retardant, microbe resistant, flexible ester-based PU-R ducting, ideal for ventilation, fume & dust extraction and the woodworking industry. With its lightweight, twin-layer PU construction and encapsulated copper wire helix, the unique polyurethane construction of this German engineered product is abrasion resistant, and remains constantly and evenly antistatic. Construction: AIRDUC profile hose ester-polyurethane (Pre-PUR) Branding: AIRDUC PUR 355 AS Reinforcement: Coated heavy duty spring steel wire integrated in wall. Spec/Regulations: Antistatic 26057 Type 1. RoHS Temperature: From -40°C to +90°C.
    I.D. MM O.D MM WALL THICKNESS MM BEND RADIUS MM OVER PRESSURE BAR WEIGHT KG / M
    51 60 1.5 35 2.450 0.660
    64 75 1.5 43 1.910 0.840
    80 91 1.5 69 1.560 1.050
    101 111 1.5 83 1.250 1.490
    126 136 1.5 101 1.010 1.840
    151 161 1.5 118 0.840 2.410
    180 191 1.5 139 0.700 2.870
    201 213 1.5 156 0.630 3.120
    252 263 1.5 194 0.500 3.950
  • AIRDUC® TPE 363
    AIRDUC® TPE 363

    Airduc TPE 363 Thermoplastic Ducting

    , ,
    Medium-heavy duty flexible ducting, for hot and cold gases, dust, powder and bulk material.
    Construction: Thermoplastic rubber.
    Branding: AIRDUC TPE 363
    Reinforcement: Spring steel wire integrated in wall.
    Spec/Regulations: RoHS.
    Temperature: From -40°C to +150°C.

    I.D.
    MM
    O.D
    MM
    WALL
    THICKNESS
    MM
    BEND
    RADIUS
    MM
    OVER
    PRESSURE
    BAR
    WEIGHT
    KG / M
    51 58 0.8 33 0.560 0.370
    64 73 0.8 41 0.430 0.490
    80 88 0.8 48 0.350 0.590
    101 108 0.8 58 0.280 0.740
    126 133 0.8 71 0.225 0.910
    151 158 0.8 83 0.190 1.100
    180 188 0.8 98 0.155 1.290
    201 208 0.8 108 0.140 1.440
    254 262 0.8 135 0.110 1.860
  • air-hose
    air-hose

    Anti-Static Black Rubber Air Hose

    , , ,
    20 Bar (300 psi) Anti-static air hose manufactured to BS 2050 specifications.
    Cover: Black EPDM, Ozone and weather resistant.
    Branding: Antistatic BS2050 WP 20 BAR.
    Reinforcement: High tensile synthetic textile plies.
    Tube: Black EPDM
    Temperature: From -40°C to +100°C.
    Safety Factor: 3:1 Minimum.
    I.D.
    MM
    O.D
    MM
    W.P
    BAR
    B.P
    BAR
    WEIGHT
    KG / METRE
    6 14 20 64 0.210
    8 17 20 64 0.300
    10 19 20 64 0.350
    13 21 20 64 0.370
    16 26 20 64 0.560
    19 29 20 64 0.640
    25 35 20 64 0.900
  • VINILFLEX
    VINILFLEX

    Black PVC Pond & Aquatic Hose

    , , , ,
    Hozelock Tricoflex light duty suction & delivery hose, for use in ventilation, ducting and irrigation systems, and as an outdoor conduit/cable protector. The hose comprises a soft black pvc wall and rigid shock-proof pvc spiral, this enables for superior flexibility and mechanical/chemical resistance. Used widely in the industrial, domestic and horticulture/agriculture sectors for: Ventilation, Suction of air and fumes, Small pumps and water delivery up to 3 bar and seed drills. For domestic water delivery use, the hose is ideal for connections between pumps, filters, uvcs, fountains and waterfalls. For electrical applications it is suitable for both indoor and outdoor environments, to protect cables from weathering, foot traffic and water ingress. The smooth bore construction allows cables to be easily inserted, and the pvc cover is resistant to water and numerous chemicals. Cover: Black PVC, resistant to weathering, UV and chemicals. Branding: None Reinforcement: Semi rigid PVC spiral. Tube: Smooth bore PVC. Temperature: From -10°C to +55°C. Safety Factor: 3:1 Vacuum: 4m h2o
    I.D. MM O.D MM WALL THICKNESS MM BEND RADIUS MM W.P BAR WEIGHT KG /METRE
    19 23.7 2.4 24 2 0.150
    25.4 30.9 2.6 31 2 0.170
    32 36 3.0 40 2 0.250
    38 44.4 3.2 48 2 0.320
    40 47.4 3.5 55 1 0.390
  • VACUPRESS-FLEX
    VACUPRESS-FLEX

    Black PVC Suction Hose (Vacupress Flex)

    , , , ,
    Merlett Vacupress Flex is a twin layer plasticized PVC hose with an embedded steel spiral and polyester yarn reinforcement. Merlett Vacupress Flex is a highly flexible high pressure suction and delivery hose, with a textile and steel spiral helix allow vertical suction of liquids and slurry. Applications:
    • Waste water pumping
    • Slurry removal
    • Road tankers
    • Highway maintenance
    • Bulk powder transfer
      Cover: Black smooth PVC, with excellent flexibility, weather and abrasion resistant. Branding: MERLETT VACUPRESS FLEX MADE IN ITALY Reinforcement: High tensile polyester yarn braid and embedded steel spiral helix. Tube: Smooth bore plasticized black PVC. Temperature: From -25°C to +60°C. Safety Factor: 3:1 Vacuum: 9m h2o
    I.D. MM O.D MM WALL THICKNESS MM BEND RADIUS MM W.P BAR WEIGHT KG /METRE
    50 64 6.5 150 10 1.600
    76 92 8 210 9 2.970
    102 119 8.5 300 8 4.150
    127 145 9 370 7.5 5.950
    152 171 9.5 480 5 7.050
  • air-hose
    air-hose

    Black Rubber Air & Water Hose

    , , , ,
    20 Bar (300 psi) air / water hose manufactured to BS EN ISO2398 + BS5118/2 specifications.
    Cover: Black smooth SBR/NR with good abrasion and weather resistanc.
    Branding: BS EN ISO 2398 + BS5118/2 - 20 BAR.
    Reinforcement: High tensile synthetic textile plies.
    Tube: Black SBR/NR Oil mist resistant.
    Temperature: From -25°C to +70°C.
    Safety Factor: 3:1 Minimum.
    I.D.
    MM
    O.D
    MM
    W.P
    BAR
    B.P
    BAR
    WEIGHT
    KG / METRE
    6 14 20 64 0.210
    8 17 20 64 0.300
    10 19 20 64 0.350
    13 21 20 64 0.370
    16 26 20 64 0.560
    19 29 20 64 0.640
    25 35 20 64 0.900
  • LAYFLAT
    LAYFLAT

    Blue PVC Lay Flat Hose 4Bar

    , , ,
    Light weight flexible PVC lay flat hose, for delivery of liquids under pressure. Suitable for drainage, water supply, irrigation and sprinkler systems. This can also be used for chemical transfer such as liquid fertilisers and other agricultural chemicals. Layflat hose is suitable for open-ended discharge situations only. Flexible layflat PVC hose with polyester yarn reinforcement has a 4 bar working pressure with a 12 bar burst pressure across all of the sizes.

    **Please note that the hose is measured by the internal diameter, not the width of the hose when flat**

    Construction: Blue PVC ageing and abrasion resistant. Branding: 4 BAR Reinforcement: Polyester Yarn. Spec/Regulations: None. Temperature: From -10°C to +60°C.  
    I.D. MM WORKING PRESSURE BAR BURST PRESSURE BAR STANDARD LENGTH M
    25 4 12 100
    32 4 12 100
    38 4 12 100
    51 4 12 100
    76 4 12 100
    102 4 12 100
    152 4 12 100
  • air-hose
    air-hose

    BSAU 108 Fuel & Oil Hose

    , , , ,
    Textile reinforced fuel and oil hose conforms to BSAU108 + SAEJ30R6 specifications, suitable for unleaded petrol.
    Cover: Black smooth CR/NBR, with good abrasion, weather and oil resistance.
    Branding: FUEL HOSE BSAU 108/2 L4/C4R + SAE J30R6 WP 200psi year of manufacture embossed.
    Reinforcement: High tensile synthetic textile plies.
    Tube: Black smooth NBR, resistant to petroleum products with max 50% aromatic content & max 5% by volume of oxygenates or MTBE.
    Temperature: From -40°C to +100°C.
    Safety Factor: 4:1 Minimum.
    I.D.
    MM
    O.D
    MM
    W.P
    BAR
    B.P
    BAR
    WEIGHT
    KG / METRE
    6 13 14 56 0.120
    8 15 14 56 0.145
    10 18 14 56 0.180
    13 22 14 56 0.280
    16 25 14 56 0.330
    19 29 14 56 0.480
    22 32 14 56 0.550
  • 45-female
    45-female

    BSP 45° Swept Female Fittings

    , , ,
    45° BSP female swept elbow 60° cone seat - BS5200 /ISO 12151-6
    Manuli Hydraulics universal solution for wire spiral and braid hoses, which offers a simple and cost effective solution aimed at reducing production, distribution and assembling costs .

    Ç Available in sizes 1/4" to 1"

    PART REF.
    HOSE BORE
    DASH
    HOSE BORE
    INCH
    BSPP THREAD
    INCH
    M20543-04-04 4 1/4" 1/4"
    M20543-04-06 4 1/4" 3/8"
    M20543-06-06 6 3/8" 3/8"
    M20543-06-08 6 3/8" 1/2"
    M20542-08-06 8 1/2" 3/8"
    M20543-08-08 8 1/2" 1/2"
    M20542-08-10 8 1/2" 5/8"
    M20542-08-12 8 1/2" 3/4"
    M20542-10-10 10 5/8" 5/8"
    M20542-10-12 10 5/8" 3/4"
    M20542-12-08 12 3/4" 1/2"
    M20542-12-12 12 3/4" 3/4"
    M20542-12-16 12 3/4" 1"
    M20542-16-16 16 1" 1"

    Our stock changes on a constant basis, so if you have specific requirements please give us a call _ items that are not in stock can usually be sourced within a couple of working days.
  • comfemale
    comfemale

    BSP 90° Compact Female Fittings

    , , ,
    90° BSP 0-ring female compact elbow 60° cone - BS5200 / ISO 12151-6
    Manuli Hydraulics universal solution for wire spiral and braid hoses, which offers a simple and cost effective solution aimed at reducing production, distribution and assembling costs .

    Ç Available in sizes 1/4" to 1"

    PART REF.
    HOSE BORE
    DASH
    HOSE BORE
    INCH
    BSPP THREAD
    INCH
    M20882-04-04 4 1/4" 1/4"
    M2088-06-06 6 3/8" 3/8"
    M2088-08-08 8 1/2" 1/2"
    M2088-10-10 10 5/8" 5/8"
    M2088-12-12 12 3/4" 3/4"
    M2088-16-16 16 1" 1"

    Our stock changes on a constant basis, so if you have specific requirements please give us a call _ items that are not in stock can usually be sourced within a couple of working days.
  • 90female
    90female

    BSP 90° Swept Female Fittings

    , , ,
    90° BSP female swept elbow 60° cone seat - BS5200 /ISO 12151-6
    Manuli Hydraulics universal solution for wire spiral and braid hoses, which offers a simple and cost effective solution aimed at reducing production, distribution and assembling costs .

    Ç Available in sizes 1/4" to 1"

    PART REF.
    HOSE BORE
    DASH
    HOSE BORE
    INCH
    BSPP THREAD
    INCH
    M20593-04-04 4 1/4" 1/4"
    M20593-04-06 4 1/4" 3/8"
    M20592-06-04 6 3/8" 1/4"
    M20593-06-06 6 3/8" 3/8"
    M20593-06-08 6 3/8" 1/2"
    M20592-08-06 8 1/2" 3/8"
    M20593-08-08 8 1/2" 1/2"
    M20592-08-10 8 1/2" 5/8"
    M20592-08-12 8 1/2" 3/4"
    M20592-10-10 10 5/8" 5/8"
    M20592-10-12 10 5/8" 3/4"
    M20592-12-08 12 3/4" 1/2"
    M20592-12-12 12 3/4" 3/4"
    M20592-12-16 12 3/4" 1"
    M20592-16-12 16 1" 3/4"
    M20592-16-16 16 1" 1"

    Our stock changes on a constant basis, so if you have specific requirements please give us a call _ items that are not in stock can usually be sourced within a couple of working days.
  • Banjo
    Banjo

    BSP Banjo Fittings

    , , ,
    BSP banjo connections
    Manuli Hydraulics universal solution for wire spiral and braid hoses, which offers a simple and cost effective solution aimed at reducing production, distribution and assembling costs .

    Ç Available in sizes 1/4" to 1"

    PART REF.
    HOSE BORE
    DASH
    HOSE BORE
    INCH
    BSPP THREAD
    INCH
    O20310-04-04 4 1/4" 1/4"
    O20310-04-06 4 1/4" 3/8"
    O20310-06-06 6 3/8" 3/8"
    O20310-06-08 6 3/8" 1/2"
    O20310-08-08 8 1/2" 1/2"
    O20310-10-10 10 5/8" 5/8"
    O20310-12-12 12 3/4" 3/4"
    O20310-16-16 16 1" 1"

    Our stock changes on a constant basis, so if you have specific requirements please give us a call _ items that are not in stock can usually be sourced within a couple of working days.
  • Ftadap
    Ftadap

    BSP Female Equal Tees

    , , ,
    Hydraulic female equal tee - BSPP x BSPP x BSPP 60° cone:

    Ç Available in sizes 1/8" to 2"

    THREAD SIZE 1 (INCH) THREAD SIZE 2 (INCH) THREAD SIZE 3 (INCH) MATERIAL
    1/8 1/8 1/8 Steel
    1/4 1/4 1/4 Steel
    3/8 3/8 3/8 Steel
    1/2 1/2 1/2 Steel
    5/8 5/8 5/8 Steel
    3/4 3/4 3/4 Steel
    1 1 1 Steel
    1 1/4 1 1/4 1 1/4 Steel
    1 1/2 1 1/2 1 1/2 Steel
    2 2 2 Steel

    Our stock changes on a constant basis, so if you have specific requirements please give us a call _ items that are not in stock can usually be sourced within a couple of working days.
  • ffadap
    ffadap

    BSP Female x Female Adaptors

    , , ,
    Hydraulic swivel female adaptor - BSP x BSP 60° cone:

    Ç Available in sizes 1/8" to 2"

    THREAD SIZE 1 (INCH) THREAD SIZE 2 (INCH) MATERIAL
    1/8 1/8 Steel
    1/8 1/4 Steel
    1/8 3/8 Steel
    1/4 1/4 Steel
    1/4 3/8 Steel
    1/4 1/2 Steel
    3/8 3/8 Steel
    3/8 1/2 Steel
    3/8 3/4 Steel
    1/2 1/2 Steel
    1/2 3/4 Steel
    1/2 1 Steel
    3/4 3/4 Steel
    3/4 1 Steel
    1 1 Steel
    1 1.1/4 Steel
    1.1/4 1.1/4 Steel
    1.1/2 1.1/2 Steel
    2 2 Steel

    Our stock changes on a constant basis, so if you have specific requirements please give us a call _ items that are not in stock can usually be sourced within a couple of working days.
  • Mtadap
    Mtadap

    BSP Male Equal Tees

    , , ,
    Hydraulic male equal tee - BSPP x BSPP x BSPP 60° cone:

    Ç Available in sizes 1/4" to 2"

    THREAD SIZE 1 (INCH) THREAD SIZE 2 (INCH) THREAD SIZE 3 (INCH) MATERIAL
    1/4 1/4 1/4 Steel
    3/8 3/8 3/8 Steel
    1/2 1/2 1/2 Steel
    3/4 3/4 3/4 Steel
    1 1 1 Steel
    1 1/2 1 1/2 1 1/2 Steel
    2 2 2 Steel

    Our stock changes on a constant basis, so if you have specific requirements please give us a call _ items that are not in stock can usually be sourced within a couple of working days.
  • stfemale
    stfemale

    BSP Straight Female Fittings

    , , ,
    BSP female 60° cone seat - BS5200 /ISO 12151-6
    Manuli Hydraulics universal solution for wire spiral and braid hoses, which offers a simple and cost effective solution aimed at reducing production, distribution and assembling costs .

    Ç Available in sizes 1/4" to 1"

    PART REF.
    HOSE BORE
    DASH
    HOSE BORE
    INCH
    BSPP THREAD
    INCH
    M20512-04-04 4 1/4" 1/4"
    M20513-04-06 4 1/4" 3/8"
    M20513-04-08 4 1/4" 1/2"
    M20512-06-04 6 3/8" 1/4"
    M20513-06-06 6 3/8" 3/8"
    M20513-06-08 6 3/8" 1/2"
    M20512-08-06 8 1/2" 3/8"
    M20513-08-08 8 1/2" 1/2"
    M20512-08-10 8 1/2" 5/8"
    M20512-08-12 8 1/2" 3/4"
    M20512-10-10 10 5/8" 5/8"
    M20512-10-12 10 5/8" 3/4"
    M20512-12-08 12 3/4" 1/2"
    M20512-12-12 12 3/4" 3/4"
    M20512-12-16 12 3/4" 1"
    M20512-16-12 16 1" 3/4"
    M20512-16-16 16 1" 1"

    Our stock changes on a constant basis, so if you have specific requirements please give us a call _ items that are not in stock can usually be sourced within a couple of working days.
  • stmale
    stmale

    BSP Straight Male Fittings

    , , ,
    BSP male parallel 60° cone seat - BS5200 /ISO 8434-6
    Manuli Hydraulics universal solution for wire spiral and braid hoses, which offers a simple and cost effective solution aimed at reducing production, distribution and assembling costs .

    Ç Available in sizes 1/4" to 2"

    PART REF.
    HOSE BORE
    DASH
    HOSE BORE
    INCH
    BSPP THREAD
    INCH
    M10510-04-04 4 1/4" 1/4"
    M10510-04-06 4 1/4" 3/8"
    M10510-04-08 4 1/4" 1/2"
    M10510-06-04 6 3/8" 1/4"
    M10510-06-06 6 3/8" 3/8"
    M10510-06-08 6 3/8" 1/2"
    M10510-08-06 8 1/2" 3/8"
    M10510-08-08 8 1/2" 1/2"
    M10510-08-10 8 1/2" 5/8"
    M10510-08-12 8 1/2" 3/4"
    M10510-10-10 10 5/8" 5/8"
    M10510-10-12 10 5/8" 3/4"
    M10510-12-08 12 3/4" 1/2"
    M10510-12-12 12 3/4" 3/4"
    M10510-12-16 12 3/4" 1"
    M10510-16-12 16 1" 3/4"
    M10510-16-16 16 1" 1"
    M10510-16-20 16 1" 1 1/4"
    M10510-20-20 20 1 1/4" 1 1/4"
    M10510-24-24 24 1 1/2" 1 1/2"
    M10510-32-32 32 2" 2"

    Our stock changes on a constant basis, so if you have specific requirements please give us a call _ items that are not in stock can usually be sourced within a couple of working days.